single HDPE head continuous extrusion blow molder

* Dual station shuttle clamp
* 80mm 24:1 extruder
* 50HP DC extruder drive with two speed gear box
for PVC and HDPE capability
* HDPE screw currently installed
* single HDPE head (and we have other heads optionally available,
including a dual 140mm BKD51 HDPE/PVC head)
* 2-up production of 5 liter bottles with currently installed single
head (actual production capability depends on specific bottle design)
* 4-up production of 2 liter bottles with optionally available dual 140mm
head (actual production capability depends on specific bottle design)
* Hydraulic calibration
* solid state controls
* Hunkar 311 parison programmer
* one owner machine, well maintained

SPECIFICATIONS of the single HDPE head continuous extrusion blow molder:
(dual station shuttle clamp)
* 2, 4, 6, 8 cavity molds
* Maximum part dimensions
(a Bekum 121 can produce bottles up to 5 liters. The actual part
dimensions will be determined by the specific part design)
375mm maximum bottle length
200mm maximum bottle diameter
* Maximum usable mold area (HxV inches) 13.4 x 18.7
* Clamp force 7.8 tons
* Maximum open daylight 18.9 inches
* dry cycle time: sec. 1.7
* max. number of cycles per minute: 26
* operating pressure, pneumatic: bar(psi) 8-10(100-125)
* hydraulic pump motor rating: 11.2kW, 15HP

Extruder of the single HDPE head continuous extrusion blow molder
* extruder L/D ratio: 24/1
* screw diameter: 80mm
* screw speed range: HDPE 0-86 rpm, PVC 0-46 rpm
* screw power requirement: 38kW, 50HP
* maximum output: HDPE 127kg/hr (280lb/hr); PVC 105kg/hr (230lb/hr)

Electrical, air and cooling water consumption data:
* heating capacity extruder: 16.3kW
* connected load of complete unit, max. possible (smooth barrel): 73.5kW
* hydraulic tank cooling, max.: 15300kJ/hr (14500BTU/hr)
* compressed air requirement (intake), max.: 2400NL/min (85scfm)
* NOTE: Actual air, cooling water and power consumption are approximate
and will vary with bottle type(s) and production set-up. Actual
consumption approximately 60% of the maximums listed.
12000BTU/HR.=1ton refrigeration

single HDPE head extrusion blow molder

Offers recycled LDPE, HDPE, flex PVC, rigid PVC, and various engineering plastics resins for extrusion, injection and blow molding.

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.

HDPE head extrusion blow molder

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.

Custom modular blow molders for the plastics industry. Manufacturing plastic bottles, toys and industrial parts.

HDPE head continuous extrusion blow molder

Offers recycled LDPE, HDPE, flex PVC, rigid PVC, and various engineering plastics resins for extrusion, injection and blow molding.

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.

single HDPE head continuous extrusion blow molder

Offers recycled LDPE, HDPE, flex PVC, rigid PVC, and various engineering plastics resins for extrusion, injection and blow molding.

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.

Manufacture plastic purging compounds for injection molders, injection and extrusion blow machines, multi -layer dies, and hot runner systems.